Audison Forza AF M1D Mono Companion Amplifier — 600W @ 4Ω, 1000W @ 2Ω, 1200W @ 1Ω with Built-In Sub Controls

The Audison Forza AF M1D is a compact mono Class D amplifier delivering 600W @ 4Ω, 1000W @ 2Ω and 1200W @ 1Ω RMS (14.4 VDC, 1% THD). It can sit behind a Forza bit amplifier or processor as a companion, and it is the only amplifier in the Forza D range that also works stand-alone, thanks to a set of manual controls. That makes it a flexible subwoofer amplifier for both fully tuned DSP systems and simple add-a-sub upgrades.

Key Features

• Mono output: 600W @ 4Ω / 1000W @ 2Ω / 1200W @ 1Ω
• Rated to a 1Ω minimum load for flexible subwoofer wiring
• Adjustable (and defeatable) 4th-order low-pass crossover filter
• 0–180° polarity/phase switch and a 45 Hz bass boost adjustment
• Latest-generation Audison D-Class (ADT) technology with 81% efficiency at rated power
• Works behind Forza bit amplifiers and standalone bit processors, or on its own for add-a-sub installs

Power and Technical Highlights

Automatic remote turn-on from high-level inputs and speaker-input loading (USS) let the amplifier connect to factory systems without a separate remote lead. An optional VCR-S2 level knob provides a dash-mounted subwoofer volume control. Bandwidth is 10 Hz – 500 Hz (-3 dB), damping factor is 140 and supply is 11–15 VDC with 2 x 35A fuses, with a maximum current draw of around 65 A. It has no DSP.

Ideal For / System Fit

• Add-a-sub installs, including in systems without an Audison bit amplifier
• Companion subwoofer power behind a Forza bit DSP amplifier or bit One HD Virtuoso
• Compact installs that still need 1000W-class bass output

Not designed for midrange or tweeter duty: it is a subwoofer amplifier with a 500 Hz bandwidth and no DSP.

Installation Note

Authorized-dealer listings show a supplied kit with 2-channel speaker-out, Pre-In and speaker-in cables, a remote in/out lead, the Forza install kit and an owner's manual. Use correct fusing and heavy-gauge power wiring for the current draw above.

What's Included

1 x Audison Forza AF M1D mono amplifier with supplied installation cables and owner's manual

Precautions

• Power ratings are measured at 14.4 VDC, 1% THD; real output depends on the vehicle's electrical system
• Match the subwoofer's impedance to the rated loads (4Ω, 2Ω or 1Ω); do not go below 1Ω
• Professional installation with proper fusing, grounding and wiring is strongly recommended
• Set gain and bass boost carefully to avoid driving the subwoofer beyond its limits

Audison Forza AF M1D vs. Standard Mono Amplifier

Frequently Asked Questions

What is the Audison Forza AF M1D used for?
It powers a subwoofer, either on its own or as a companion to a Forza bit amplifier or processor.

How much power does it deliver?
600W @ 4Ω, 1000W @ 2Ω and 1200W @ 1Ω RMS (14.4 VDC, 1% THD).

Can it run stand-alone?
Yes. It is the only amplifier in the Forza D family with manual controls for stand-alone use.

Does it have a DSP?
No. It has no DSP, but it includes a low-pass filter, a phase switch and a 45 Hz bass boost.

Can I connect it to a factory stereo?
Yes. Speaker-level inputs with automatic remote turn-on let you connect without a line-out converter.

Can I add a dash-mounted volume control?
Yes, with the optional VCR-S2 subwoofer level knob.

What load can it drive?
It is rated down to 1Ω.

Can I pair it with a Forza bit amplifier?
Yes. It is designed as a companion for AF bit amplifiers, with a plug-and-play signal harness.

Product Specifications

Get compact, high-power bass for any system — order the Audison Forza AF M1D today.