Audison Prima APK 690 6x9" 2-Way Component Speaker System — 100W RMS / 300W Peak, 4Ω

The Audison Prima APK 690 is a 6x9-inch 2-way component speaker system for car doors designed to hold elliptical speakers. It pairs an AP 690 woofer with a 25 mm pure copper voice coil and an AP 1 tweeter, with dedicated APCX TW 690 crossovers. It handles 100W continuous (RMS) and 300W peak power at 4Ω, and the compact basket makes it easier to fit in OEM positions.

Key Features

• 2-way system: AP 690 woofer (6x9") and 26 mm AP 1 tweeter
• Power handling of 100W continuous / 300W peak, 4Ω, 95 dB sensitivity, 40 Hz – 20 kHz response
• 25 mm pure copper voice coil for high power handling and low-frequency control
• APCX TW 690 crossover with a 0 dB / +3 dB tweeter level switch, optimized for OEM integration
• Mechanical cone/dust-cap cut-off, so the woofer can be used without a filter
• Double Faston connectors with a direct link to the tweeter, and a "Triple Wave" surround for linear excursion

Technical Highlights

The woofer is optimized for car-door installation, with a compact basket and shallow mounting depth, and its cone is water-repellent treated paper shaped using simulation technology. The AP 1 tweeter has a 26 mm diaphragm with a wide-roll surround and an acoustic lens that compensates for in-car frequency response anomalies.

Ideal For / System Fit

• Doors with elliptical 6x9" speaker openings
• Upgrades that need strong bass from a single woofer with a separate tweeter
• Systems driven by an aftermarket amplifier or running without a DSP

Fitment depends on the vehicle: confirm that your door takes a 6x9" speaker and a separate tweeter before ordering, and professional installation is recommended.

Installation Note

Set the crossover switch to 0 dB or +3 dB depending on where the tweeter sits. The woofer needs no filter, but the tweeter should always run through its crossover.

What's Included

1 x Audison Prima APK 690 2-way component system (a pair of woofers, tweeters and crossovers; grilles are not confirmed, so check with your supplier)

Precautions

• Match amplifier power to the 100W continuous / 300W peak rating to avoid damage
• Confirm door fitment for 6x9" speakers before buying
• Always run the tweeter through its crossover
• Professional installation is recommended

Audison Prima APK 690 vs. Factory 6x9 Speakers

Frequently Asked Questions

What is the Audison Prima APK 690?
A 6x9" 2-way component speaker system with a woofer, tweeter and crossovers.

How much power can it handle?
100W continuous (RMS) and 300W peak, at 4Ω.

What is its frequency range?
40 Hz – 20 kHz, with 95 dB sensitivity.

What is special about the woofer?
It has a 25 mm pure copper voice coil and can be used without a filter.

What does the crossover switch do?
It attenuates the tweeter by 0 dB or +3 dB to suit the installation.

Will it fit my car?
It suits doors designed for elliptical 6x9" speakers; check your vehicle first.

Does it need an amplifier?
An amplifier is recommended, though the woofer's efficiency lets it be driven by many amplifiers.

How is it connected?
Through double Faston connectors with a direct link to the tweeter.

Product Specifications

Bring real bass and clean highs to your 6x9 doors — order the Audison Prima APK 690 today.