Audison Voce II AVK 6 P II 6.5" 2-Way Passive Component Speaker System — 150W RMS / 300W Peak, 4Ω, Hi-Res Tweeter
The Audison Voce II AVK 6 P II is a 6.5-inch (165 mm) 2-way passive component speaker system, from the second generation of Audison's Voce range. It pairs the AV 6.5 P II woofer with the AV 1.1 II Hi-Res tweeter and the AVCX 2 P TW passive crossover, so you get a complete, pre-tuned system for doors and dashboard positions. The woofer handles 150W continuous (RMS) and 300W peak power at 4Ω, and the tweeter extends beyond 40 kHz.
Key Features
- 2-way passive component system: AV 6.5 P II woofer, AV 1.1 II tweeter and AVCX 2 P TW crossover
- Power handling of 150W continuous / 300W peak, 4Ω, with 91 dB sensitivity
- 40 mm CCAW (copper-clad aluminium wire) voice coil on the woofer and a high-density ferrite magnet
- 28 mm (1.1") Tetolon fibre dome tweeter with a response of 1 kHz – 40 kHz, which complies with Hi-Res Audio (JAS)
- AIF (Any Install Faceplate) tweeter, supplied with mesh and spoke grilles for flexible mounting
- AVCX 2 P TW crossover with Mid-Contour, Hi-Contour, Hi Boost and tweeter level controls, plus bi-amplification support
Technical Highlights
The woofer has a semi-pressed paper cone, a 45 Hz – 7,500 Hz response (-6 dB), a resonance frequency (Fs) of 66 Hz and an Xmax of 4.95 mm. It weighs about 1.6 kg, the tweeter about 0.1 kg, and the mounting depth is about 69.8 mm. The crossover uses a 6 dB/octave slope on the woofer and a 12 dB/octave high-pass on the tweeter, with a crossover point around 3 kHz at its reference settings. The tweeter's 180W peak rating applies with a 1.8 kHz high-pass filter (12 dB/octave).
Ideal For / System Fit
- Doors and dash positions that take a 6.5" woofer and a separate tweeter
- Owners who prefer a passive system with adjustable crossover contours
- Systems that use a DSP or two amplifier channels (bi-amping) to drive the woofer and tweeter separately
Fitment depends on the vehicle: check the 165 mm woofer opening, the 69.8 mm mounting depth and tweeter locations before ordering. Professional installation is recommended.
Installation Note
The kit uses OEM-style and Faston connectors, so it adapts to most wiring set-ups. Set the crossover's Mid-Contour, Hi-Contour, Hi Boost and tweeter level switches to suit your car's acoustics and tweeter position, and match the amplifier to the 150W RMS rating.
What's Included
1 x pair of Audison Voce II AVK 6 P II: 2 woofers, 2 tweeters, 2 AVCX 2 P TW crossovers, and tweeter mounting accessories with mesh and spoke grilles (confirm the exact contents, including any woofer grilles, with your supplier)
Precautions
- Match amplifier power to the 150W RMS / 300W peak rating to avoid damage
- Confirm the woofer opening, mounting depth and tweeter position for your vehicle before buying
- Always connect the woofer and tweeter through the supplied crossover
- Professional installation and tuning are recommended
Audison Voce II AVK 6 P II vs. Factory 6.5" Speakers
| Feature |
Audison Voce II AVK 6 P II |
Typical Factory 6.5" Speakers |
| Design |
2-way component with separate tweeter and crossover |
Often full-range or simple coaxial |
| Tweeter |
28 mm Tetolon dome, 1–40 kHz, Hi-Res compliant |
Usually limited high-frequency range |
| Woofer voice coil |
40 mm CCAW |
Varies |
| Crossover tuning |
Mid/Hi Contour, Hi Boost, tweeter level, bi-amp support |
None or basic |
| Best for |
A detailed, tunable sound upgrade |
Basic playback |
Frequently Asked Questions
What is the Audison Voce II AVK 6 P II?
A 6.5" 2-way passive component speaker system with a woofer, a Hi-Res tweeter and a passive crossover.
How much power can it handle?
150W continuous (RMS) and 300W peak at 4Ω, with a 180W peak tweeter rating when high-pass filtered at 1.8 kHz.
What is its frequency range?
The woofer covers 45 Hz – 7,500 Hz (-6 dB) and the tweeter 1 kHz – 40 kHz.
Is the tweeter Hi-Res compatible?
Yes. The AV 1.1 II extends beyond 40 kHz and complies with Hi-Res Audio (JAS).
Is it passive or active?
It is a passive system with a passive crossover, but the crossover supports bi-amplification and the woofer works with a DSP.
What can I adjust on the crossover?
Mid-Contour, Hi-Contour, Hi Boost and tweeter level, to suit your car's acoustics and tweeter position.
What size is the woofer and how deep is it?
165 mm (6.5"), with a mounting depth of about 69.8 mm.
Do I need an amplifier?
An amplifier is recommended to use the system's power handling and get the best performance.
Product Specifications
| Specification |
Detail |
| Product |
Audison Voce II AVK 6 P II 2-Way Passive Component System |
| Driver sizes |
165 mm (6.5") woofer, 28 mm (1.1") tweeter |
| Power handling |
150W continuous / 300W peak (woofer); 180W peak (tweeter, high-passed) |
| Impedance / sensitivity |
4Ω / 91 dB |
| Frequency response |
Woofer 45 – 7,500 Hz (-6 dB); tweeter 1 – 40 kHz |
| Crossover |
AVCX 2 P TW passive, Mid/Hi Contour, Hi Boost, tweeter level |
| Brand |
Audison |
Bring detailed, tunable Hi-Res sound to your doors — order the Audison Voce II AVK 6 P II today.