Audison Voce II AVK 6A P II 6.5" 2-Way Active Component Speaker System — 150W RMS / 300W Peak, 4Ω, Hi-Res Tweeter for DSP Systems

The Audison Voce II AVK 6A P II is a 6.5-inch (165 mm) 2-way active component speaker system for car audio systems that use a DSP. It pairs the AV 6.5 P II mid-bass woofer with the AV 1.1 II Hi-Res tweeter and comes without a passive crossover, so you set the crossover points in your DSP or active crossover. The woofer handles 150W continuous (RMS) and 300W peak power at 4Ω, and the tweeter extends beyond 40 kHz. Audison describes it as a partner for modern DSPs that can respond to even small adjustments.

Key Features

• 2-way active system: AV 6.5 P II woofer and AV 1.1 II tweeter, with no passive crossover supplied
• Power handling of 150W continuous / 300W peak, 4Ω, with 91 dB sensitivity
• 40 mm CCAW (copper-clad aluminium wire) voice coil on the woofer and a high-density ferrite magnet
• 28 mm (1.1") Tetolon soft dome tweeter with a neodymium magnet and a response of 1 kHz – 40 kHz, Hi-Res Audio certified
• AIF (Any Install Faceplate) tweeter with two faceplates (FP 1 and FP 2), four mounting accessories and mesh and spoke grilles
• OEM-style and Faston connectors, plus Audison's eID technology for product traceability

Technical Highlights

The woofer has a semi-pressed pulp cone with cotton fibres, a high-excursion butyl rubber surround, an optimized spider and a die-cast aluminium basket with a magnet cover. Its low-inductance motor, with a built-in aluminium shorting ring, helps the upper midrange (2–3 kHz). The woofer covers 45 Hz – 7,500 Hz (-6 dB) and the tweeter 1 kHz – 40 kHz, with a peak rating of 180W. Because the drivers have a wide, flexible range, the crossover points can be set across a wide range in the DSP.

Ideal For / System Fit

• Active systems where a DSP or active crossover sets the filters and levels
• Installs with two amplifier channels (or amplifier channel pairs) for the woofers and tweeters
• Owners who want a Hi-Res tweeter and a high-power mid-bass driver for the front stage

Not a plug-and-play passive kit: it does not include a passive crossover, so it needs a DSP or active crossover and separate amplifier channels. If you want a passive set-up, look at the AVK 6 P II instead. Professional installation is recommended.

Installation Note

Fitment details listed by Abt are a cutout of about 5.54 in (141 mm) and a top-mount depth of about 2.75 in (70 mm). Choose the tweeter faceplate and mounting accessory that suits your car, set the crossover and levels in your DSP, and match the amplifier to the 150W RMS woofer rating.

What's Included

1 x pair of Audison Voce II AVK 6A P II: 2 x AV 6.5 P II mid-bass woofers, 2 x AV 1.1 II tweeters with FP 1 and FP 2 faceplates, 4 tweeter mounting accessories (watch band, double-angle cup, flush mounting ring, metal mounting spring), mesh and spoke tweeter grilles, a P&P cable and Audison logo badges (woofer grilles are optional and not included; confirm the exact contents with your supplier)

Precautions

• Do not connect the woofer or tweeter to an amplifier without proper crossover filtering from a DSP or active crossover
• Match amplifier power to the 150W RMS / 300W peak rating to avoid damage
• Confirm the woofer opening, mounting depth and tweeter position for your vehicle before buying
• Professional installation and DSP tuning are recommended

Audison Voce II AVK 6A P II vs. Audison Voce II AVK 6 P II

Frequently Asked Questions

What is the Audison Voce II AVK 6A P II?
A 6.5" 2-way active component speaker system with a mid-bass woofer and a Hi-Res tweeter, made for DSP set-ups.

What does "active" mean here?
The system does not include a passive crossover; the crossover points and levels are set in a DSP or active crossover.

What do I need to run it?
A DSP or active crossover and separate amplifier channels for the woofers and tweeters.

How much power can it handle?
150W continuous (RMS) and 300W peak at 4Ω, with the tweeter rated at 180W peak.

What is its frequency range?
The woofer covers 45 Hz – 7,500 Hz (-6 dB) and the tweeter 1 kHz – 40 kHz.

Is the tweeter Hi-Res compatible?
Yes. The AV 1.1 II is Hi-Res Audio certified and extends beyond 40 kHz.

What size is the cutout?
About 5.54 in (141 mm), with a top-mount depth of about 2.75 in (70 mm).

How is it different from the AVK 6 P II?
The drivers and power ratings are the same, but the AVK 6A P II has no passive crossover and is made for DSP systems.

Product Specifications

Build a precise, DSP-tuned Hi-Res front stage — order the Audison Voce II AVK 6A P II today.